Telit Wireless Solutions ME910G1 - AT+CSCS - Select te Character Set

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 102 of 1039 2021-09-23
Not Subject to NDA
3.2.2.36. AT+CSCS - Select TE Character Set
The command purpose is to set different character sets that are used by the device.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Specific profile
No
-
2
AT+CSCS=[<chset>]
Set command sets the current character set used by the device.
Parameter:
Name
Type
Default
Description
<chset>
string
IRA
character set
to be used by
the device.
Values:
GSM
:
GSM default alphabet (3GPP TS 23.038).
IRA
:
international reference alphabet (ITU-T T.50).
8859-1
:
ISO 8859 Latin 1 character set.
PCCP437
:
PC character set Code Page 437.
UCS2
:
16-bit universal multiple-octet coded
character set (ISO/IEC10646).
HEX
:
Character strings consist only of hexadecimal
numbers from 00 to FF; e.g. "032FE6" equals
three 8-bit characters with decimal values 3,
47 and 230; no conversions to the original MT
character set shall be done. If MT is using
GSM 7 bit default alphabet, its characters