Telit Wireless Solutions ME910G1 - Page 341

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 341 of 1039 2021-09-23
Not Subject to NDA
UICC when targeting applications on the
smart card using a logical channel other
than the default channel (channel "0").
<sessionId> is returned by the +CCHO
command.
<length>
integer
-
characters number of the <command>
sent to UICC (two times the actual
length of the command)
<command>
string
-
command passed on by the MT to the
UICC in the format as described in
standard [1] or [2] (hexadecimal
character format; refer to +CSCS).
Additional info:
List of the meaning of the response messages parameters.
Name
Type
Default
Description
<length>
integer
-
characters number of the
<response> sent to TE (two times
the actual length of the response)
<response>
string
-
response to the command passed
on by the UICC to the TE in the
format as described in standard
[1] or [2] (hexadecimal character
format)
<err>
string
-
error values (numeric format
followed by verbose format)
AT+CGLA=?
Test command returns the OK result code.