Telit Wireless Solutions ME910G1 - Page 192

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 192 of 1039 2021-09-23
Not Subject to NDA
Read command returns current value of <mode>, <format>, <oper> and
<AcT> in format <format>. If no operator is selected, <format>, <oper> and
<AcT> are omitted.
+COPS: <mode>[, <format>, <oper>,< act>]
If the module is deregistered, <format>, <oper>, and <act> parameters are
omitted.
AT+COPS=?
Test command returns a list of quadruplets, each representing an
operator present in the network. The quadruplets list is ended with the
range values of the <mode> and <formats> parameters.
The quadruplets in the list are closed between round brackets, separated
by commas, the <oper> parameter is returned in both formats.
+COPS: [quadruplets list (<stat>,<oper (in <format>=0)>,<oper (in
<format>=2)>,< act>),
(<stat>,<oper (in <format>=0)>,<oper (in <format>=2)>,< act>), ...]
[,,(range of <mode>),(range of <format>)]
<stat> parameter is described in the Additional info section.
Additional info:
Meaning of the <stat> parameter.
Name
Type
Default
Description
<stat>
integer
N/A
operator availability
Values:
0
:
unknown
1
:
available
2
:
current