Telit Wireless Solutions ME910G1 - Page 200

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 200 of 1039 2021-09-23
Not Subject to NDA
AT+CLIR?
Read command gives the default adjustment for all outgoing calls (<n>)
and also triggers an interrogation of the provision status of the CLIR
service (<m>), in the form
+CLIR: <n>,<m>
Additional info:
Parameters:
Name
Type
Default
Description
<n>
integer
0
facility status in the Mobile
Values:
0
:
CLIR facility according to CLIR service network
status
1
:
CLIR facility active (CLI not sent)
2
:
CLIR facility not active (CLI sent)
<m>
integer
N/A
facility status in the Network
Values:
0
:
CLIR service not provisioned
1
:
CLIR service provisioned permanently
2
:
unknown (e.g. no network present)
3
:
CLI temporary mode presentation restricted
4
:
CLI temporary mode presentation allowed
AT+CLIR=?
Test command reports the supported values of parameter <n>