Telit Wireless Solutions ME910G1 - Page 206

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 206 of 1039 2021-09-23
Not Subject to NDA
0
:
access technology not selected
1
:
access technology selected
<GSM_Compact_AcT>
integer
N/A
GSM compact access
technology. Currently the
parameter is not supported
but set value is accepted.
Values:
0
:
access technology not selected
1
:
access technology selected
<UTRAN_AcT>
integer
N/A
UTRAN access technology.
Currently the parameter is
not supported but set value is
accepted.
Values:
0
:
access technology not selected
1
:
access technology selected
<E_UTRAN_AcTn>
integer
N/A
E-UTRAN access technology
Values:
0
:
access technology not selected
1
:
access technology selected
If <index> is used, and <oper> is not entered, the entry is deleted
from the list of preferred operators.
If <oper> is used, and <index> is not used, <oper> is put in the next
free location.
If only <format> is entered, the format of the <oper> in the read
command is changed.