Telit Wireless Solutions ME910G1 - Page 236

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 236 of 1039 2021-09-23
Not Subject to NDA
Modules supporting the command
ME310G1-
WW
ME310G1-
W1
ME910G1-
WW
ME910G1-
W1
ML865G1-
WW
Set command: Tuning LTE band B2 by setting value "E180" to tuner QAT3516
connected on ID=0
AT#BNDTUNER=1,0,2,"E180"
OK
Set command: Tuning GSM band 900 by setting value "D280" to tuner QAT3516
connected on ID=0
AT#BNDTUNER=1,0,900,"D280"
OK
Test command: any GSM band are allowed
AT#BND?
#BND 5,0,252582047,0,1048578
AT#BNDTUNER=?
#BNDTUNER:
(1),(0),(1,2,3,4,5,8,12,13,18,19,20,25,26,27,28,66,85,850,900,1800,1900),4,(0),(0),(0)
Test command: only 900 and 1800 GSM band are allowed
AT#BND=0
OK
AT#BND?
#BND 0,0,252582047,0,1048578
AT#BNDTUNER=?
#BNDTUNER:
(1),(0),(1,2,3,4,5,8,12,13,18,19,20,25,26,27,28,66,85,900,1800),4,(0),(0),(0)
OK