Telit Wireless Solutions ME910G1 - Page 255

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 255 of 1039 2021-09-23
Not Subject to NDA
Here is the list of the parameters meaning returned by the read
command.
Name
Type
Default
Description
<cipher>
integer
0
shows cipher status
Values:
0
:
cipher off
1
:
cipher on
2
:
unknown (missing network information)
<SIM/USIM
flag>
integer
0
SIM/USIM cipher status
indication
Values:
0
:
disabled
1
:
enabled
2
:
unknown (flag not read yet)
AT#CIPHIND=?
Test command reports the range for the parameter <mode>