Telit Wireless Solutions ME910G1 - Page 257

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 257 of 1039 2021-09-23
Not Subject to NDA
1
:
EGPRS network
4
:
LTE network
5
:
unknown or not registered
AT#PSNT?
If <mode> is set to 0 or 1, read command returns the current values of the
<mode> and <nt> parameters in the format:
#PSNT: <mode>,<nt>
If <mode> is set to 2, read command returns the current values of <mode>
and <nt> parameters followed by four dummy parameters set to 0.
#PSNT:<mode>,<nt>,0,0,0,0
AT#PSNT=?
Test command reports the range for the parameter <mode>