Telit Wireless Solutions ME910G1 - Page 259

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 259 of 1039 2021-09-23
Not Subject to NDA
24. bit 1 = GEA2
25. bit 2 = GEA3
26. bits 3 - 7 = reserved for future
use
Values:
0
:
no GPRS encryption algorithm
1÷7
:
sum of integers each representing a specific
GPRS encryption algorithm: 1 – GEA1 2 – GEA2
4 – GEA3
255
:
reset the default values
The values are stored in NVM and available on following reboot.
For possible <encGSM> and <encGPRS> encryptions see test
command response.
If no parameter is issued, the set command returns ERROR.
AT#ENCALG?
Read command reports the currently selected <encGSM> and <encGPRS>,
and the last used <usedGSM> and <usedGPRS> in the format:
#ENCALG: <encGSM>,<encGPRS>,<usedGSM>,<usedGPRS>
Additional info:
Last used <useGSM> and <useGPRS> are expressed in the format:
Name
Type
Default
Description
<usedGSM>
integer
1
GSM encryption algorithm