Telit Wireless Solutions ME910G1 - Page 286

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 286 of 1039 2021-09-23
Not Subject to NDA
5
SERVICE REQUEST INITIATED
6
DEREGISTRATION INITIATED
Parameters
Description
<RRC>
Radio Resource state (for debug purpose only; see above)
<CID>
Cell ID
Parameter/values
Description
<IMSI>
International Mobile Station ID<SD> - Service Domain
0
No Service
1
CS only
2
PS only
3
CS+PS
Parameters/values
Description
<ABND>
Active Band
1..63
According to 3GPP TS 36.101
Parameters
Description
<T3402>
Timer T3402 in seconds
<T3412>
Timer T3412 in seconds
<SINR>
Signal-to-Interface plus Noise Ratio
AT#RFSTS=?
Test command tests for command existence.