Telit Wireless Solutions ME910G1 - Page 312

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 312 of 1039 2021-09-23
Not Subject to NDA
The command takes effect after the module reboot.
Warning: the "Not required" information contained in the "SIM
Presence" field of the table, placed above the command syntax,
must be replaced with "Required".
AT#WS46?
Read command reports the currently selected technology and priority, in
the format:
#WS46: <n>,<GSM_P>
AT#WS46=?
Test command reports the range for the parameters <n> and <GSM_P>.