Telit Wireless Solutions ME910G1 - Page 335

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 335 of 1039 2021-09-23
Not Subject to NDA
Additional info:
List of the meaning of the response messages parameters.
Name
Type
Default
Description
<length>
integer
-
characters number of the
<response> sent to TE (two times
the actual length of the response)
<response>
string
-
response to the command passed
on by the UICC to the TE in the
format as described in standard
[1] or [2] (hexadecimal character
format)
<err>
string
-
error values (numeric format
followed by verbose format)
AT+CSIM=?
Test command returns the OK result code.
AT+CSIM=<lock>
This special form of the command has no effect and is kept only for
backward compatibility.
Parameters:
<lock>=1 locking of the interface
<lock>=0 unlocking of the interface