Telit Wireless Solutions ME910G1 - Page 432

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 432 of 1039 2021-09-23
Not Subject to NDA
Name
Type
Default
Description
<length>
integer
N/A
length in bytes of the
PDU to be written
Value:
7÷164
:
number of bytes
<stat>
integer
N/A
message status
Values:
0
:
new message new message (received unread
message; default for DELIVER messages
(3GPP TS 23.040 SMS-DELIVER messages))
1
:
read message
2
:
stored message not sent yet (default for
SUBMIT messages (3GPP TS 23.040 SMS-
SUBMIT messages))
3
:
stored message already sent
<data>
hex
-
PDU bytes, given in
online mode
In Text mode the +CMGW command has the following syntax:
AT+CMGW[=<da>[,<toda>[,<stat>]]]
After command line is terminated with <CR>, the module responds
sending a four-character sequence prompt:
<CR><LF><greater_than><space> (IRA 13, 10, 62, 32)
After this prompt, you can enter text that should be formatted as
follows: