Telit Wireless Solutions ME910G1 - Page 434

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 434 of 1039 2021-09-23
Not Subject to NDA
"REC
UNREAD"
:
new received message unread
"REC READ"
:
received message read
"STO UNSENT"
:
message stored not yet sent
(default)
"STO SENT"
:
message stored already sent
Unsolicited field:
Name
Type
Description
<index>
integer
message location index in the memory <memw>
(see +CPMS). If message storing fails for some
reason, an error code is reported.
The DCD signal shall be in ON state while <data> is entered. The
echoing of <data> is controlled by echo command E.
In PDU mode, not only SUBMIT messages can be stored in SIM,
but also DELIVER and STATUS REPORT messages (3GPP TS
23.040 SMS-STATUS-REPORT messages). SUBMIT messages can
only be stored with status 2 or 3; DELIVER and STATUS REPORT
messages can only be stored with status 0 or 1.
Care must be taken to ensure that during the command
execution, which may take several seconds, no other SIM
interacting commands are issued.
It is possible to save a concatenation of at most 10 SMs; the
maximum number of chars depends on <dcs>:
12. 2448 chars
13. 2144 chars if 8-bit is used
14. 1072 chars if UCS2 is used
In text mode, not only SUBMIT messages can be stored in SIM,
but also DELIVER messages.