Telit Wireless Solutions ME910G1 - Page 520

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 520 of 1039 2021-09-23
Not Subject to NDA
#TEMPCFG:<etlz_clr>,<etlz>,<etlz_act_in>,<otlz_clr>,<otlz>,<otlz_act_in>,<otnz_
clr>,
<otnz>,<otnz_act_in>,<otuz_clr>,<otuz>,<otuz_act_in>,<etuz_clr>,<etuz>,<etuz_ac
t_in>
AT#TEMPCFG=?
Test command reports the supported range values for parameters <x_clr>,<x>,
<x_act_in>, where "x" is substitute for etlz, otlz, otnz, otuz, etuz.
Values are:
#TEMPCFG: (-40-100),(-40-100),(0-5)