Telit Wireless Solutions ME910G1 - Page 536

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 536 of 1039 2021-09-23
Not Subject to NDA
31. not registered: blinking 0,5 s ON and 0,5 s OFF
32. registered in idle: blinking 300 ms ON and 2,7 s OFF
33. registered in idle with power saving: blinking time depends
on network condition to minimize power consumption
34. during a voice call: always ON
AT#SLED?
Read command returns the STAT_LED pin current setting, in the format:
#SLED: <mode>,<onDuration>,<offDuration>
AT#SLED=?
Test command returns the range of available values for parameters
<mode>, <onDuration> and <offDuration>.
The setting is saved using the #SLEDSAV command.