Telit Wireless Solutions ME910G1 - Page 614

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 614 of 1039 2021-09-23
Not Subject to NDA
List of the meaning of the response message parameters.
Name
Type
Default
Description
<berrerId>
integer
-
identifies the bearer, EPS Bearer
in EPS and NSAPI in
UMTS/GPRS.
<apn>
string
-
logical name used to select the
GGSN or the external packet data
network.
<ip&subnet>
string
-
IP address and subnet mask of
the MT. The string is given as
dot-separated numeric (0-255)
parameters on the form. For
more information, see next
Additional info section.
<gw_addr>
string
-
Gateway address of the MT. The
string is given as dot-separated
numeric (0-255) parameters.
<DNS_prim>
string
-
IP address of the primary DNS
Server.
<DNS_sec>
string
-
IP address of the secondary DNS
Server.
<P_CSCF_prim>
string
-
IP address of the primary P-
CSCF Server.
<P_CSCF_sec>
string
-
IP address of the secondary P-
CSCF Server.
Referring to <ip&subnet> parameter:
the string is given as dot-separated numeric (0-255) parameters. The
format is:
for IPv4:
"a1.a2.a3.a4.m1.m2.m3.m4"