Telit Wireless Solutions ME910G1 - Page 730

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 730 of 1039 2021-09-23
Not Subject to NDA
<eof>
integer
0
data port closure
Values:
0
:
normal sending of data chunk
1
:
close data port after sending data chunk
Additional info:
Parameters:
Name
Type
Default
Description
<sentBytes>
integer
N/A
the number of sent bytes
Value:
1÷1500
:
number of bytes
<sentBytes> could be less than <bytesToSend>.
AT#FTPAPPEXT=?
Test command reports the supported values of parameters
<bytesToSend> and <eof>.