Telit Wireless Solutions ME910G1 - Page 792

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 792 of 1039 2021-09-23
Not Subject to NDA
exchange within this timeout
period, the connection
is closed.
Values:
0
:
no timeout
1÷65535
:
timeout in seconds
<defTo>
integer
100
timeout that will be used by
default whenever the
corresponding parameter of
each command is not set.
Value:
10÷5000
:
timeout in tenth of seconds
<txTo>
integer
50
data sending timeout. In
online mode, after this period
data are sent also if they're
less than max packet size.
Values:
0
:
no timeout
1÷255
:
timeout value in hundreds of
milliseconds
<SSLSRingMode>
integer
0
SSLRING unsolicited mode
Values:
0
:
disable
1
:
enable decoded data format, see
Additional info section
2
:
enable chunk of data format, see
Additional info section
<noCarrierMode>
integer
0
selects the NO CARRIER
indication format when the
secure socket is closed.