ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 82 of 1039 2021-09-23
If power saving is enabled, it reduces the power consumption
during the idle time, thus allowing a longer standby time with a
given battery capacity.
The power saving function does not affect the network behavior of
the module, even during the power save condition the module
remains registered on the network and reachable for incoming
calls or SMS. If a call incomes during the power save, then the
module will wake up and proceed normally with the unsolicited
incoming call code.
AT+CFUN?
Read command reports the current setting of <fun> in the format
+CFUN: <fun>
AT+CFUN=?
Test command returns the list of supported values for <fun> and <rst>.
To Next Page
Loading...
