Telit Wireless Solutions ME910G1 - Page 829

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 829 of 1039 2021-09-23
Not Subject to NDA
<dataType>
integer
0
security data type
Values:
0
:
certificate
1
:
CA certificate
2
:
RSA Private key. Private keys with
password are not supported
<size>
integer
N/A
size of security data to be
stored. The parameter is
mandatory if write action is
issued, can be omitted for
delete or read actions.
Value:
1÷4095
:
size
<Password>
string
-
dummy parameter, unused.
<md5WhenReading>
string
0
handling of RSA Private key
reading when <action> is 2.
Values:
0
:
RSA Private key is displayed in clear
1
:
only RSA Private key MD5 is displayed
Additional info:
Store security data in NVM or in RAM
<action>=1 or 3 specifies the storing in NVM or in RAM, <size> parameter is
mandatory. After command line is terminated with <CR>, the command
returns the following four-character sequence prompt:
<CR><LF><greater_than><space> (see IRA 13, 10, 62, 32)
and waits for data to be store. Security data must be in PEM format: