Telit Wireless Solutions ME910G1 - Page 869

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 869 of 1039 2021-09-23
Not Subject to NDA
"immediate" delay is not changed from its previous
configured value.
if <delay> provided:
"Immediate" delay is set accordingly.
See special case for <mode>=5 in additional info.
Parameters setting provided with <mode> in boot mode range is
saved on "/mod/appcfg.ini" file
Executables are binary files with ".bin" extension saved in "/mod"
directory which RUN permission has been set individually by
#M2MRUN command (boot mode) including specific *.bin file. The
integrity check is performed internally.
In order to allow any application to start, the AppZone engine must
be running (see +M2M).
AT#M2MRUN?
Read command reports the executables properties. The report has the
following format
#M2MRUN: <app1.bin,run1,delay1,state1,va1,ram1>
#M2MRUN: <app2,bin,run2,delay2,state2,va2,ram2>
...
#M2MRUN: <appN,bin,runN,delayN,stateN,vaN,ramN>
Additional info:
Here are the parameters meanings.
Name
Type
Default
Description
<appN.bin>
string
-
executable name