Telit Wireless Solutions ME910G1 - Page 914

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 914 of 1039 2021-09-23
Not Subject to NDA
3.24.12.2. AT#MQSNCFG2 - Configure additional MQTT-SN parameters
This command sets the optional connection parameters for the selected MQTT-SN client
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSNCFG2=<instanceNumber>,<keepalive>,<clean_session>
Set command writes the MQTT-SN parameters for the specified client
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQSNEN? or
the read command.
To know maxClients value use
test command.
Value:
1÷maxClients
:
client instance Number
<keepalive>
integer
20
Timeout of periodic packet to
keep connection open
Values:
20
:
Default timeout 20 seconds
1÷3600
:
Timeout in seconds
<clean_session>
integer
1
Indicates whether or not a
persistent connection is
required. Without a persistent
connection, when the client is
offline all information and
messages that are queued from