Telit Wireless Solutions ME910G1 - Page 935

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 935 of 1039 2021-09-23
Not Subject to NDA
AT#MQSNUNS=?
Test command reports the available range of values for parameters
•
Set example
AT#MQSNUNS=1,0,topicToUnsubscribe
OK
•
Test example (refer to module output for real ranges)
AT#MQSNUNS=?
#MQSNUNS: (1-maxClients),(0-2),256
OK