Telit Wireless Solutions ME910G1 - Page 950

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 950 of 1039 2021-09-23
Not Subject to NDA
If #MQSNCONN URC is received, socket is closed internally and
client moves to init state. User can establish the connection again
with AT#MQSNSOCK and AT#MQSNCONN commands.
AT#MQSNCONN?
Read command reports the configuration of active MQTT-SN connections
in the format:
#MQSNCONN=<instanceNumber>,<state>
Additional info:
Parameter:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client
instance. The number of
available clients is
obtained with the test
command.
To know maxClients value
use test command.
Value:
1÷maxClients
:
client instance Number
<state>
integer
N/A
Client status.
Values:
0
:
client is in init state
1
:
socket is created
2
:
client is connected