Telit Wireless Solutions ME910G1 - Page 970

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 970 of 1039 2021-09-23
Not Subject to NDA
Data NMEA sentence (RMC) in the GNSS
data stream.
Values:
0
:
disable
1
:
enable
<VTG>
integer
0
enable/disable the presence of the GNSS
Course Over Ground and Ground Speed
NMEA sentence (VTG) in the GNSS data
stream.
Values:
0
:
disable
1
:
enable
Additional info:
<enable>=1, GNSS data stream format:
$GPSNMUN: <NMEA SENTENCE 1><CR><LF>
...
$GPSNMUN: <NMEA SENTENCE N><CR><LF>
...
<enable>=2, GNSS data stream format:
<NMEA SENTENCE 1><CR><LF>
...
<NMEA SENTENCE N><CR><LF>
...
<enable>=3, in this case, the AT interface port is dedicated to NMEA
sentences, it is not possible to send AT commands. Use the escape
sequence "+++" to return in command mode. GNSS data stream
format: