Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 100 of 1039 2021-09-23
Not Subject to NDA
3.2.2.35. AT#PSMRI - Power Saving Mode Ring Indicator
The command enables or disables the Ring Indicator pin response to an URC message
while modem is in power saving mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Common
profile
No
-
2
AT#PSMRI=<n>
Set command enables/disables the Ring Indicator pin response to an URC
message while modem is in power saving mode. If enabled, a negative
going pulse is generated, when URC message for specific event is invoked.
The duration of this pulse is determined by the value of <n>.
Parameter:
Name
Type
Default
Description
<n>
integer
0
disables, enables/sets duration of the
generated pulse.
Values:
0
:
disables RI pin response for URC message
50÷1150
:
enables RI pin response for URC messages with
a duration specified in ms
When RING signal from incoming call/SMS/socket listen is
enabled, the behavior for #PSMRI will be ignored.
The behavior for #PSMRI is invoked only when modem is in sleep
mode AT+CFUN=5.
AT#PSMRI?

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English