Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 959 of 1039 2021-09-23
Not Subject to NDA
3.25.2. GNSS Receiver
3.25.2.1. AT$GPSRST - Restore Default GPS Parameters
This command resets the GNSS parameters to "Factory Default" configuration
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$GPSRST
Set command resets the GNSS parameters to "Factory Default"
configuration and stores them in the NVM of the cellular modules
AT$GPSRST=?
Test command returns the OK result code
The module must be restarted to use the new configuration
Only GNSS parameters relative to the following AT commands can
be reset in NVM: $GPSP, $GPSNMUN and $GPSNMUNEX.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English