Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 609 of 1039 2021-09-23
Not Subject to NDA
3.14.6. AT#GAUTH - PPP Data Connection Authentication Type
This command sets the authentication type used in PDP Context Activation during PPP-
PS connections.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#GAUTH=[<type>]
Set command sets the authentication type used in PDP Context Activation
during PPP-PS connections.
Parameter:
Name
Type
Default
Description
<type>
integer
3
authentication type used in PDP Context
Activation during PPP-PS connections
Values:
0
:
no authentication
1
:
PAP authentication
2
:
CHAP authentication
3
:
AUTO authentication (PAP or CHAP or no authentication
according to host application)
if the settings on the server side (the host application) of the PPP
are not compatible with the #GAUTH setting, then the PDP Context
Activation will use no authentication.
AT#GAUTH?
Read command reports the current authentication type, in the format:
#GAUTH: <type>

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English