Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 518 of 1039 2021-09-23
Not Subject to NDA
3.10.2. AT#TEMPCFG - Temperature Monitor Configuration
Set command sets the temperature zones shown in Note section. Use #TEMPMON
command to get the current internal temperature of the module.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#TEMPCFG=<etlz_clr>,<etlz>,<etlz_act_in>,<otlz_clr>,<otlz>,<otlz_act_in >,
<otnz_clr>,<otnz>,<otnz_act_in>,<otuz_clr>,<otuz>,<otuz_act_in>,
<etuz_clr>,<etuz>,<etuz_act_in>
Parameters:
Name
Type
Default
Description
<etlz_clr>
integer
-
extreme low zone temperature
threshold clear. It has only one valid
value: -273 °C. See note.
<etlz>
integer
-
extreme low zone temperature
threshold. Default value -33 °C.
<etlz_act_in>
integer
-
extreme low zone action info. Default
value 0.
<otlz_clr>
integer
-
operate low zone temperature
threshold clear. Default value -35 °C.
<otlz>
integer
-
operate low zone temperature
threshold. Default value -28 °C.
<otlz_act_in>
integer
-
operate low zone action info. Default
value 0.
<otnz_clr>
integer
-
operate normal zone temperature
threshold clear. Default value -30 °C.
<otnz>
integer
-
operate normal zone temperature
threshold. Default value 95 °C.
<otnz_act_in>
integer
-
operate normal zone action info.
Default value 0.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English