Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 325 of 1039 2021-09-23
Not Subject to NDA
3.4.7. AT#SIMPR - SIM Presence Status
The command enables/disables the SIM Presence Status unsolicited indication.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT#SIMPR=[<mode>]
Set command enables/disables the SIM Presence Status unsolicited
indication in the ME. This command reports also the status of the remote
SIM, if the SIM Access Profile (SAP) functionality is supported and has
been enabled.
If notification is enabled, the ME informs about every (local and remote)
SIM status change through the following URC:
#SIMPR: <SIM>,<status>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Specifies if notification must be enabled or
disabled.
Values:
0
:
notification disabled
1
:
notification enabled
Unsolicited fields:
Name
Type
Description
<SIM>
integer
Reports local or remote SIM
Values:
0
:
local SIM

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English