Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 562 of 1039 2021-09-23
Not Subject to NDA
Power Down
3.11.1. AT#REBOOT - Module Reboot
Immediate module reboot.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#REBOOT
Execution command reboots immediately the unit.
It can be used to reboot the system after a remote update of the script in
order to have the new one running.
If #REBOOT follows an AT command that stores some
parameters in NVM, it is recommended to insert a delay of at
least 5 seconds before to issue #REBOOT, to permit the complete
NVM storing.
#REBOOT is an obsolete AT command; please refer to #ENHRST
to perform a module reboot.
AT#REBOOT=?
Test command returns OK result code.
•
Reboot the module
AT#REBOOT
OK
(the module reboots)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English