ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 387 of 1039 2021-09-23
3.6.4. AT+CSCA - Service Center Address
This command allows to set the Service Center Address for SMS transmissions.
AT+CSCA=<number>[,<type>]
Set command sets the Service Center Address to be used for mobile
originated SMS transmissions
Parameters:
String type phone number of forwarding
address in format specified by <type>
parameter
National numbering scheme
International numbering scheme (contains the
character "+")
AT+CSCA?
Read command reports the current value of the SCA in the format:
+CSCA: <number>,<type>