Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 994 of 1039 2021-09-23
Not Subject to NDA
3.25.5. Assisted GNSS
3.25.5.1. AT$AGNSS - Set AGNSS Enable
This command set the AGNSS providers enable or disable. It needs a reboot to make
effective the setting.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$AGNSS=<provider>,<status>
Parameters:
Name
Type
Default
Description
<provider>
integer
N/A
selects the AGNSS provider to be set
Value:
0
:
use XTRA AGNSS provider
<status>
integer
N/A
set the AGNSS provider enable status
Values:
0
:
set selected AGNSS provider disabled
1
:
set selected AGNSS provider enabled
Before enabling XTRA, the module must have received a valid
GNSS fix. If XTRA is enabled before, the GNSS could not start.
AT$AGNSS?
Read command returns the requested and the active status for each
AGNSS provider.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English