Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 251 of 1039 2021-09-23
Not Subject to NDA
3.3.26. AT#CEERNETEXT - Extended Error Report for Network Reject Cause
This command is both a set and an execution command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CEERNETEXT[=[<func>]]
Set command enables/disables the URC presentation or delates the last
network information. The execution command
(AT#CEERNETEXT<CR><LF>) gets the last reject error information from
the network and returns the following message:
#CEERNETEXT: <code>,<AcT>,<MCC>,<MNC>
If no error information is present, the execution command returns OK
When URC is enabled, it will occur every time a mobility management
(MM/GMM/EMM) or session management (SM/ESM) procedure is not
accepted by the network.
The URC message is equal to the message returned by the execution
command.
Parameter:
Name
Type
Default
Description
<func>
integer
0
enable/disable the URC or delete the last
network info
Values:
0
:
disable the #CEERNETEXT URC
1
:
enable the #CEERNETEXT URC
2
:
delete last info of <code>, <AcT>, <MCC> and <MNC>
Unsolicited fields:
Name
Type
Description

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English