Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 363 of 1039 2021-09-23
Not Subject to NDA
3.5.2. AT#STGI - SIM Toolkit Get Information
The #STGI command interfaces to the SIM/USIM Application Toolkit to get information
on the ongoing proactive command .
3GPP TS 31.111
Telit SIM/USIM Application Toolkit Application Note
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#STGI=[<cmdType>]
Set command gets parameters of the ongoing proactive command . The
command can be used after the reception of the #STN: <cmdType> URC. If
no proactive command is ongoing, #STGI returns an ERROR message.
Parameter:
Name
Type
Default
Description
<cmdType>
integer
N/A
proactive command code. For each
proactive command listed below, its
#STGI response format is described in
the Additional info sections.
Values:
1
:
REFRESH
5
:
SET UP EVENT LIST
16
:
SET UP CALL
17
:
SEND SS
18
:
SEND USSD
19
:
SEND SHORT MESSAGE

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English