Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1025 of 1039 2021-09-23
Not Subject to NDA
Debugging
3.30.1. AT#TRACE - Enable/Disable Trace
The command selects which trace outputs you want to display through the debugging
tool.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#TRACE=[<mode>],[<configurationString>]
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
switches all trace outputs ON
or OFF.
If parameter <mode> is no
entered in the command, the
following
<configurationString> will be
used.
Values:
0
:
sets all trace outputs OFF,
<configuration String> will be ignored
1
:
sets all trace outputs ON,
<configurationString> will be ignored
<configurationString>
string
-
enables/disables a set of
trace outputs, its syntax is
shown in the Additional info
section.
Additional info:
The syntax of the <configurationString> is:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English