Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 928 of 1039 2021-09-23
Not Subject to NDA
3.24.12.7. AT#MQSNCFG - Configure MQTT-SN parameters
This command sets the connection parameters for the selected MQTT-SN client
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#MQSNCFG=<instanceNumber>,<hostname>,<port>,<cid>
Set command writes the MQTT-SN parameters for the specified client
Parameters:
Name
Type
Default
Description
<instanceNumber>
integer
N/A
Selects the client instance. The
list of available clients is
obtained with AT#MQSNEN? or
the read command.
To know maxClients value use
test command
Value:
1÷maxClients
:
client instance Number
<hostname>
string
-
URL of the MQTT-SN Gateway.
Maximum length of URL is 512.
<port>
integer
N/A
UDP port of the MQTT-SN
Gateway
Value:
1÷65535
:
UDP port
<cid>
integer
N/A
PDP Context ID to be used for
the connection
Value:
1÷6
:
PDP Context ID

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English