Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 334 of 1039 2021-09-23
Not Subject to NDA
3.4.11. AT+CSIM - Generic SIM Access
This command sends a generic command to the UICC.
[1] 3GPP TS 11.11
[2] 3GPP TS 31.101
[3] 3GPP TS 31.102
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CSIM=<length>,<command>
Set command transmits to the MT the <command>, it then shall send as it
is to the UICC. As response to the command, MT sends back the actual
UICC <response> to the TA as it is. The response message of the
command is in the format:
+CSIM: <length>,<response>
Error case:
+CME ERROR: <err>
The response messages parameters are described in the Additional info
section.
Parameters:
Name
Type
Default
Description
<length>
integer
-
characters number of the <command>
sent to UICC (two times the actual
length of the command)
<command>
string
-
command passed on by the MT to the
UICC in the format as described in
standard [1] or [2] (hexadecimal
character format, refer to +CSCS)

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English