Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 119 of 1039 2021-09-23
Not Subject to NDA
3.2.2.46. AT#FWSWITCH - Set Active Firmware Image
Set command allows enabling a specific firmware image on products embedding 2 or
more different firmware images.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#FWSWITCH=<imageNumber>[,<storageConf>[,<restoreUserSettings>]]
Parameters:
Name
Type
Default
Description
<imageNumber>
integer
-
To know the
<imageNumber> values
range refer to the test
command.
<storageConf>
integer
1
selects storage type
Value:
1
:
save the <imageNumber> value in NVM,
only this selection is available
<restoreUserSettings>
integer
0
restore user settings for
enabled firmware image
Values:
0
:
after firmware switch, all settings are
returned to default
1
:
after firmware switch, user settings are
restored
Additional info:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English