Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 714 of 1039 2021-09-23
Not Subject to NDA
3.15.31. AT#QDNS - Query DNS
The command executes a DNS query
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#QDNS[=<host name>]
Execution command executes a DNS query to solve the host name into an
IP address. If the DNS query is successful, then the IP address will be
reported in the result code as follows:
#QDNS: <host name>,<IP address>
Parameter:
Name
Type
Default
Description
<host name>
string
-
Host name string
Additional info:
IP address in the result code
Name
Type
Default
Description
<IP
address>
string
-
IP address in format
"xxx.xxx.xxx.xxx", or empty string if
DNS query was unsuccessful.
The command activates the PDP context if it was not
previously activated. In this case the context is deactivated after
the DNS query.
This command requires that the authentication parameters are
correctly set, and the PS network is present.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English