Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 844 of 1039 2021-09-23
Not Subject to NDA
IoT Portal
3.21.1. AT+ODIS - Command for Saving and Retrieving the Odis Parameters
This command allows the end-user to handle the Host Odis parameters. In case of AT&T
LwM2M agent up and running, the command is executed internally to the LwM2M client,
updating this client about the values change (i.e.: the server will be notified about this
change if the observation on these items is active).
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+ODIS=<odisInstance>,<hostUniqueDevId>,<hostManufacturer>,<hostModel>,<
hostSwVersion>
Parameters:
Name
Type
Default
Description
<odisInstance>
string
N/A
contains the Odis instance
where the parameters will be
stored
Values:
0
:
Odis instance 0
1
:
Odis instance 1
<hostUniqueDevId>
string
HUID0
contains a string, between
double quotes, with the host
unique device identifier.
Value:
HUID0
:
default value
<hostManufacturer>
string
HMAN0
contains a string, between
double quotes, with the host
manufacturer identifier.
Value:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English