Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 482 of 1039 2021-09-23
Not Subject to NDA
3.8.3. AT+CAPD - Postpone Alarm
Set command postpones or dismisses a currently active alarm.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CAPD=[<sec>]
Parameter:
Name
Type
Default
Description
<sec>
integer
0
time in seconds to postpone the alarm.
Values:
0
:
alarm is dismissed
1÷60
:
postpone time
Entering AT+CAPS= returns OK but has no effect.
AT+CAPD=?
Test command reports the supported range of values for parameter
<sec>.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English