Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 412 of 1039 2021-09-23
Not Subject to NDA
3.6.12. AT+CMGL - List Messages
This command is used to list the messages.
3GPP TS 27.005
3GPP TS 23.040
3GPP TS 23.038
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CMGL[=<stat>]
Execution command reports the list of all the messages with status value
<stat> stored into <memr> message storage (<memr> is the message
storage for read and delete SMs as last settings of command +CPMS).
Parameter:
Name
Type
Default
Description
<stat>
mixed
-
<stat> parameter type and the command
output depend on the last settings of the
+CMGF command (message format to be
used). There are two modes:
54. PDU mode
55. Text mode
See the following Additional info sections.
Additional info:
When message format is PDU mode, the <stat> parameter is:

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English