Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 107 of 1039 2021-09-23
Not Subject to NDA
3.2.2.38. AT#USBCFG - USB Configuration
This command sets USB configuration on the modem device.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#USBCFG=<mode>
Parameter:
Name
Type
Default
Description
<mode>
integer
0
USB configuration mode. See
#PORTCFG command.
Values:
0
:
USB Modem Ports, 1 Diag Port, 1 WWAN network
adapter (no data traffic); VID 0x1BC7 PID 0x110A
3
:
USB Modem Ports, 1 Diag Port, 1 ECM network
adapter; VID 0x1BC7 PID 0x110B
To make active the configuration the module must be rebooted.
AT#USBCFG?
Read command returns the current <mode> in the following format:
#USBCFG: <mode>
AT#USBCFG=?
Test command returns the list of supported values.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English