Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 104 of 1039 2021-09-23
Not Subject to NDA
3.2.2.37. AT+CMUX - Multiplexing Mode
This command is used to enable/disable the multiplexing protocol control channel.
3GPP TS 27.007
3GPP TS 27.010
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CMUX=<mode>[,<subset>[,<port_speed>[,<N1>[,<T1>[,<N2>[,<T2>[,<T3>[,<k>]]
]]]]]]
Set command is used to enable/disable the multiplexing protocol control channel.
Parameters:
Name
Type
Default
Description
<mode>
integer
0
basic option is currently the only
supported mode.
Value:
0
:
basic option mode.
<subset>
integer
0
the way in which the multiplexer
control channel is set up
Value:
0
:
UIH frame
<port_speed>
integer
N/A
transmission rate. The default value
is implementation specific.
Values:
1
:
9600 bps
2
:
19200 bps

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English