Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 293 of 1039 2021-09-23
Not Subject to NDA
3.3.41. AT#MONI - Cell Monitor
This command is both a set and an execution command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#MONI[=[<number>]]
Set command sets one cell out of seven, in a neighbor list of the serving
cell including it, from which extract GSM/LTE related information.
After entering the set command, enter the execution command
AT#MONI<CR> to get the GSM/LTE related information for the selected
cell and dedicated channel (if exists) in the format shown, for each
network, in the Additional info section.
Parameter:
Name
Type
Default
Description
<number>
integer
-
the parameter meaning depends on the
network, see Additional info section.
Additional info:
GSM network
Name
Type
Default
Description
<number>
integer
0
GSM
network
Values:
0÷6
:
it is the ordinal number of the cell, in the
neighbor list of the serving cell.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English