Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 789 of 1039 2021-09-23
Not Subject to NDA
3.18.4. AT#HTTPRCV - Receive HTTP Server Data
This command permits the user to read data from HTTP server in response to a previous
HTTP module request.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#HTTPRCV=<profId>[,<maxByte>]
The module is notified of these data by the #HTTPRING URC.
The device shall prompt a three-character sequence followed by the data:
<less_than><less_than><less_than> (see IRA character set: 60,60,60)
If reading ends successfully, the response is OK; otherwise an error code
is reported.
Parameters:
Name
Type
Default
Description
<profId>
integer
N/A
profile identifier
Value:
0÷2
:
profile identifier
<maxByte>
integer
0
max number of bytes to read at a time
Value:
0,
64÷1500
:
0 means infinite size.
If <maxByte> is unspecified, server data will be transferred all in
once.

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English