Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 1004 of 1039 2021-09-23
Not Subject to NDA
3.26.1.2. AT#ECMD - ECM Shutdown
This command is used to shutdown an Ethernet Control Model (ECM) session.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ECMD=<Did>
Parameter:
Name
Type
Default
Description
<Did>
integer
N/A
Device id, currently limited to 0 (only one
device)
Value:
0
:
Device id (currently limited to only one device)
To make active the command the module must be rebooted.
AT#ECMD?
Read command returns the session state in the following format:
#ECM: <Did>,<State>
OK
Additional info:
Parameter returned by the read command and not described in the
previous sections.
Name
Type
Default
Description

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English