Telit Wireless Solutions ML865G1 Reference Guide

ME310G1/ME910G1/ML865G1 AT Commands Reference Guide
80617ST10991A Rev. 11 Page 240 of 1039 2021-09-23
Not Subject to NDA
3.3.24. AT#CODECINFO - Codec Information
This command returns information about the channels codecs.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CODECINFO[=<format>[,<mode>]]
This command is a set or an execution command. It enables/disables
unsolicited channel codec information reports, or returns the channel
codec info, in both case according to the specified format.
Set command format:
AT#CODECINFO=<format>,<mode>
Execution command format:
AT#CODECINFO
Parameters:
Name
Type
Default
Description
<format>
integer
0
select the return information format:
numeric or textual
Values:
0
:
numeric format, see info section
1
:
textual format, see info section
<mode>
integer
0
enable/disable unsolicited channels
codecs information
Values:
0
:
disable the URC of the channels codecs information,
see info section
1
:
enable the URC of the channels codecs information
only if the codec changes, see info section

Telit Wireless Solutions ML865G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ML865G1
Category	Wireless modules
Language	English